This Error Occurs When The Ink Tank Is Replaced.); Invalid Ink Tank Id - Canon iPF700 Series Service Manual

<Countermeasure>
1) Replace the ink tank.
2) Replace the ink tank unit.
3) Replace the main controller PCB.
6.1.4.28 03830101-2521/03830102-2522/03830103-2523/03830104-2520/03830106-2526/03830105-2527 Ink tank is not
installed. ( This error occurs when the ink tank is replaced.)
<Cause>
When the ink tank was replaced, the closed state of the ink cover was detected with the ink tank removed.
<Probable fault location>
Operation method, ink tank, ink tank cover switch, ink tank unit, or main controller PCB
<Countermeasure>
1) Operation check
Install the ink tank.
2) Visual check
Remove foreign substances from the ink tank contacts and ink cover switch if any.
3) Replace the ink tank.
4) Ink tank cover switch
Check for normal operation. If the operation is abnormal, replace the ink tank cover switch.
5) Replace the ink tank unit.
7) Replace the main controller PCB.

6.1.4.29 03830201-2541/03830202-2542/03830203-2543/03800204-2540/03830206-2546/03830206-2547 Invalid ink tank ID

<Cause>
The installed ink tank is wrong.
<Probable fault location>
Ink tank, ink tank unit, or main controller PCB
<Countermeasure>
1) Replace the ink tank.
2) Replace the ink tank unit.
3) Replace the main controller PCB.
6.1.4.30 03830301-2561/03830302-2562/03830303-2563/03830304-2560/03830306-2566/03830306-2567 Ink tank EEPROM
error
<Cause>
An ink tank EEPROM checksum error was detected.
<Probable fault location>
Ink tank, ink tank unit, or main controller PCB
<Countermeasure>
1) Replace the ink tank.
2) Replace the ink tank unit.
3) Replace the main controller PCB.
6.1.4.31 03841001-2819/03841001-281B/03841101-2818/03841201-2816/03841201-2817 Maintenance cartridge error
<Cause>
The maintenance cartridge is full.
The maintenance cartridge does not have the free space for various types of cleaning.
No maintenance cartridge is installed.
The EEPROM of the maintenance cartridge is abnormal.
A maintenance cartridge ID error occurred.
<Probable fault location>
Maintenance cartridge, maintenance cartridge relay PCB, or main controller PCB
<Countermeasure>
1) Replace the maintenance cartridge.
2) Replace the maintenance cartridge relay PCB.
3) Cable continuity check
If continuity of the cable between the maintenance cartridge relay PCB and the main controller PCB is abnormal, replace the cable.
4) Replace the main controller PCB.
6.1.4.32 03861001-2405/03861001-2406 Borderless printing error
<Cause>
The position where the media is loaded is not suitable for borderless printing.
The received data is not suitable for borderless printing.
<Probable fault location>
Operation method
<Countermeasure>
1) Check the operation method and retry printing.
Chapter 6
0013-6840
0013-6841
0013-6843
0014-0993
0014-0984
6-9