Saeco Lirika SUP041EU Instructions Manual page 68

English
If the coffee residues drawer
is not positioned correctly,
the brew group may not fit
into the machine.
Make sure that the brew group is in the off position. The
two reference marks must match.
If they do not match, proceed as described below:
Ensure that the lever is in contact with the brew group
base.
68
Make sure that the hook which locks the brew group is in
the correct position. Firmly press the "PUSH" button to
check its position.
Insert the brew group into its seat again until it locks into
place WITHOUT pressing the "PUSH" button.
Insert the coffee grounds drawer and the drip tray. Close
the service door.
10.2.6 Brew group lubrication
Lubricate the brew group after approximately 500 cups of
coffee or once a month.
The grease to lubricate the brew group and the complete
"Service Kit" can be purchased at your local dealer or at
authorised service centres.
Before lubricating the brew group, clean it under running
water as described in the "Brew Group Cleaning" chapter.