Saeco Lirika SUP041EU Instructions Manual page 38

English
8.3.4 Password setting
The PASSWORD must be set by the service provider in
order to prevent access by unauthorised personnel who
could change the machine settings and cause malfunctions.
To set the PASSWORD, proceed as follows:
Switch to programming mode as described in section
"Access to the Programming Menu".
Press the "Menu" button until the following menu is
displayed:
Press the "ESPRESSO" button or the "Aroma" button to
select "YES".
38
Press the "MENU" button to confirm.
The option "CHANGE PSW" will be displayed, which will
allow the password to be set.
Press the "Stand-by" button to confirm and set the
password.
To enter the password:
Press the "ESPRESSO" button or the "Aroma" button to
set the desired number.
Press the "MENU" button to move on to the next number
(when it gets to the end, it will start again from the beginning).
Repeat the steps until the set password has been entered.
Press the "Stand-by" button to confirm the password and to exit
the menu.
You can exit the change
menu at any time without
saving the setting by pressing
the "Cappuccino" button.