English
Inserting the Cappuccinatore
If the water dispensing spout is installed, remove it as
shown in the figure:
• Press the two side buttons to unlock the dispensing spout
and lift it slightly.
• Pull the water dispensing spout to remove it.
Slightly tilt the Cappuccinatore. Insert it all the way into
the guides of the machine.
Push the Cappuccinatore towards the bottom while
rotating it until it is locked onto the machine. Do not force
the Cappuccinatore while inserting it.
46
When the Cappuccinatore
is not being used, hang the
suction
tube
support on the left-hand
side of the machine.
The hot water dispensing
spout can be hanged on
the same support.
on
the