Saeco Lirika SUP041EU Instructions Manual page 36

English
8.3.3 Description of Messages in the Programming Menu
DISPLAY
36
MENU ITEM Description
Coffee temperature This function allows you to adjust the coffee brewing temperature.
This function allows you to adjust the time taken for the machine to
Timer (stand-by)
go into stand-by mode after the last brewing.
NOTE:
If the "OFF" value is selected, this function is disabled and the machine
will always stay active.
This function allows you to adjust the contrast of the display to better
Contrast
view the messages.
WATER This function allows you to adjust the water hardness settings according to the area
HARDNESS where you live.
1 = very soft water
2 = soft water
3 = hard water
4 = very hard water
For more details, see the "Measuring and Adjusting Water Hardness" chapter.
"INTENZA+" water This function allows you to manage the "INTENZA+" water filter.
filter For more details, see the chapter related to filter handling.
Descaling cycle This function allows you to run the descaling cycle.
CREDIT
This function activates credit management.
MANAGEMENT
Credit charging This function activates credit charging.
NOTE:
This function is displayed only if the "Credit management" function is
set to "YES". You can access by pressing the "Stand-by" button.
Coffee grounds This function allows you to enable/disable the alarm warning the user
drawer full alarm that the coffee grounds drawer needs to be emptied.
NOTE:
Disabling this alarm may cause machine malfunctions, since the coffee
grounds may block the brew group.
This function allows you to activate or deactivate the descaling
Descale warning
warning signal.
Damage resulting from failure to descale the machine is not covered
by warranty.