Saeco Lirika SUP041EU Instructions Manual page 29

The machine automatically starts circuit priming.
It will then carry out the warm-up and rinse cycle as
described in section "Warm-up and Rinsing".
7.9.2 After a Period of Inactivity
Empty the water tank, wash and rinse it and fill it with
fresh water (see section "Filling the Water Tank").
Place a large container under the dispensing spout.
Press the "Coffee" button to start brewing. The machine
starts brewing coffee from the dispensing spout. Wait until
brewing has been completed and empty the container.
Repeat the brewing process 3 times.
Place a container under the hot water/steam wand.
Press the "Menu" button. The following screen is displayed:
Press the "Latte Macchiato" button. The following screen
is displayed:
Press the "Latte Macchiato" button again to start
dispensing. The following screen is displayed:
The machine reminds you to install the water dispensing
spout. Check that the water dispensing spout is correctly
installed. Press the "Espresso" button to confirm. The
machine starts dispensing hot water. Dispense water until
the no water icon is displayed.
When the hot water dispensing procedure has been
completed, empty the container.
English
29