Paper Jams - Canon PIXMA MX700 Series Quick Start Manual

Paper Jams

Cause
Paper jammed in the paper output slot,
the Rear Tray, or the Front Tray.
Landscape credit card-sized paper
jammed inside the machine.
114 Troubleshooting
Remove the paper following the procedure below.
(1)Slowly pull the paper out, either from the paper source or from the paper
output slot, whichever is easier.
(A)
(A) When printing from the Rear Tray
(B) When printing from the Front Tray
If the paper tears and a piece remains inside the machine, open the
Scanning Unit (Printer Cover) and remove it.
After removing all paper, close the Scanning Unit (Printer Cover), turn the
machine off, and turn it back on.
* Be careful not to touch the components inside the machine.
If you cannot pull the paper out, turn the machine off and turn it back on. The
paper will be ejected automatically.
(2)Reload the paper in the machine, and press the OK button on the machine.
If you turned off the machine in step 1, all print jobs in queue are canceled.
Reprint if necessary.
Note
For details on how to load paper, see "Loading Printing Paper" on page 10.
When reloading the paper in the machine, see "Paper Does Not Feed
Properly" on page 112 to confirm that you are using the correct paper and are
loading it into the machine correctly.
A5-sized paper are suited to print documents consisting mainly of text. We do
not recommend using such paper to print documents with photos or graphics,
since the printout may curl and cause paper exit jams.
If you cannot remove the paper or the paper tears inside the machine, or if the
paper jam error continues after removing the paper, contact your Canon service
representative.
Do not load credit card-sized paper in landscape orientation.
Slowly pull out the paper from the Rear Tray and remove it.
If you cannot remove the jammed paper or the paper jam error continues after
removing the paper, contact your Canon service representative.
Action
(B)