Changing The Print Settings - Canon PIXMA MX700 Series Quick Start Manual

1
Display the FAX menu.
See "Display the FAX menu." on page 45.
2
Display the Device settings screen.
See "Display the Device settings screen." on page 45.
3
Display the RX settings screen.
(1) Press the { or } button to select FAX settings, then press the OK button.
The FAX settings screen is displayed.
(2) Press the { or } button to select RX settings, then press the OK button.
The RX settings screen is displayed.
4
Press the { or } button to select DRPD:Set FAX ring pat., then press the OK
button.
5
Press the { or } button to select the ring pattern that your telephone company
assigned to your fax number, then press the OK button.
Select from Normal ring, Double ring, Short-short-long, Short-long-short, or Other ring
type.

Changing the Print Settings

The machine prints received faxes to paper from the specified paper source. You can change the
paper settings for printing faxes using the Operation Panel. You can use A4, Letter, or Legal-
sized plain paper to print the fax.
Important
Load Legal-sized paper in the Rear Tray. Only A4- or Letter-sized paper can be fed from the
Front Tray.
If paper of size other than A4, Letter, or Legal is loaded, the received faxes will not be printed
and "Received in memory." is displayed. Replace the paper loaded with A4, Letter, or Legal
sized paper, then press the OK button.
Note
If the sender sends a document that is larger than Letter-size, such as 11" x17" or Legal-size, the
sender's machine may send the fax automatically shrunk or divided, or send only a part of the
original.
70 Faxing