Saturn ST-CC0227 Manual page 8

-Wipe the casing with a dry cloth.
-Keep the appliance in a cool dry
place, away from the dust.
Use after storage
-Check the tank before use, if there
are sediments. Clean if necessary.
-Check the pipe if there is an obstruc-
tion, clean if necessary.
-Check the power cord. If it is dam-
aged, replace it with a new one in the
local service center.
Cleaning the heater
After a long-term high-temperature
operation of the steam-iron there will
gradually form lime scale on the heat-
ing element. Over time, the sediments
can cause clogging of the hose and
reduce the efficiency of the appliance.
Specific performance is less steam
than before or no steam at all.
To maintain the quality of the steam-
ironing it is recommended to clean the
TROUBLESHOOTING
Problem
The appliance does not
work
No steam, but the power
indicator lights
Too little steam
Tank deformation
Hot steam in the tank
Nozzle leakage
Sound from the hose
SPECIFICATIONS
Power:
Rated voltage:
Rated frequency:
Rated current:
Net weight:
Gross weight:
Probable cause
-The power cord is not
plugged
- The switch is not turned
on
-The heater is damaged
-The thermal fuse is
damaged
-The thermostat is dam-
aged
-The hose is clogged with
lime scale
-Mains voltage is too low
Pouring hot water into
the tank
-The hose is clogged with
lime scale
-The hose is bent
-The nozzle is blocked
-The nozzle is damaged
-When operating, the
nozzle was lowered below
the body of the device.
-The hose is bent
-When operating, the
nozzle was lowered below
the body of the device.
1900 W
220-240 V
50 Hz
8.6 A
4.10 kg
4.90 kg
7
heating element regularly, removing
the lime scale. From the assumption
that the device works every day for
half an hour, it should be cleaned
once every three months in areas with
soft water, and once a month in hard
water areas.
Cleaning methods:
-Pour white vinegar and water into the
tank, mixed in a ratio 1:1.
-Insert the tank into the device, plug
to the power mains, turn on the
switch, let the appliance work for
about 10 minutes.
-After 10 minutes of work turn off the
power, unplug the device, remove the
mixture.
- Rinse the tank with clean water sev-
eral times until the smell of vinegar
disappears.
If the power cord is dam-
aged, call to a service
center for replacement
-Replace the heater
-Replace the thermal fuse
-Replace the thermostat
-Clean the hose
-Provide a stable power
supply
Replace the tank in a
service center
-Clean the hose
-Straighten the hose
-Unblock the nozzle
-Replace the nozzle
-Поднимите гладильную
головку и расправьте
шланг
-Lift the nozzle and
straighten the hose
SET
Steam-iron
Clothes hanger
Trousers hanger
Protective mitten
Multifunctional brush
Collar ironing gear
Instruction Manual with
Warranty Book
Package
Solution
1
1
1
1
1
1
1
1