Scanning Two Or More Small Documents At One Time; Placing The Document - Canon MultiPASS MP360 Software Manual

Scanning two or more small documents at one
time
You can scan two or more small documents (photographs etc.) at one time with the [Color
(Multi-Scan)] in the MP Toolbox, or with the [Multi-Scan] (Simple Mode) or [Multi-Crop]
(Advanced Mode) in ScanGear MP.
"[Color (Multi-Scan)] in the MP Toolbox"
"[Multi-Scan] in ScanGear MP (Simple Mode)"
"[Multi-Crop] in ScanGear MP (Advanced Mode)"
IMPORTANT IMPORTANT IMPORTANT
• The following types of documents will not be cropped accurately.
– Documents smaller than 3/8 inch (1 cm) x 3/8 inch (1 cm)
– Long, narrow documents, the proportion of the long and short sides of which is larger than 4:1
• The following types of documents may not be cropped accurately.
– Photos that have an overall whitish appearance
– Photos that have a whitish border
– Documents other than photos (particularly documents printed on white paper, hand-written text,
business cards etc.)

Placing the document

You can place up to 10 documents.
Document
Document
Keep more than 3/8 inch (1 cm) between the documents, or the document and the edge of the
platen glass. There is automatic correction of documents that are not straight if they are off
by less than 10 degrees.
Document
Document
82