Removing And Reinstalling The Software; To Remove The Mp Toolbox; To Remove The Mp Drivers; To Reinstall The Software - Canon MultiPASS MP360 Software Manual

Removing and reinstalling the software

If you do not need the MP Toolbox or MP Drivers any longer, or if they are not installed correctly,
remove them.
When removing the software from a Windows 2000/XP operating computer, you must log on the
computer as an Administrator, or have Administrator privileges.
IMPORTANT IMPORTANT IMPORTANT
When removing the MP Drivers, first remove the MP Toolbox. If the MP Drivers are removed
beforehand, the [Canon] folder may remain in [(All) Programs] on the Start menu.

To remove the MP Toolbox

1
Quit all of the open applications, including the MP Toolbox and virus checkers.
Click [X] at the upper-right of the screen to quit the MP Toolbox.
2
On the Windows taskbar, click [Start], point to [(All) Programs], [Canon], and [MP
Toolbox 4.1] in order. Then click [Uninstall Toolbox].
3
Follow the on-screen instructions.
When the screen appears for repairing or removing the program, select the [Remove] check box, then
click [Next].
If a message appears confirming whether to remove the application, click [OK].
Select [Yes] and click [Finish], if you are prompted to restart your computer.

To remove the MP Drivers

1
Quit all of the open applications, including virus checkers.
2
On the Windows taskbar, click [Start], point to [(All) Programs], [Canon], then [MP
Drivers]. Then click [Uninstall Drivers].
3
In [Please select the device to delete.], select the machine ([MP370 Series], [MP360
Series], or [MP390 Series]), then click [Perform].
If a message appears confirming whether to remove the application, click [Yes].
The [Finish] screen is displayed.
4
Restart your computer if a message asking you to do so appears.
5
Disconnect the USB cable from the computer and machine.
Windows 2000: The [Unsafe Removal of Device] screen appears. Click [OK]. This will not affect the
machine or computer.
IMPORTANT
If you restarted your computer in step 4, disconnect the USB cable before the computer start.

To reinstall the software

After removing the MP Toolbox and MP Drivers, reinstall the software.
software"
"Installing the
17