Changing The Placement And Rotation Of A Stamp; To Change The Position Of A Stamp - Canon MultiPASS MP360 Software Manual

Changing the placement and rotation of a stamp

To change the position of a stamp

In the [Stamp Settings] dialog box, on the [Placement] tab, do one of the following.
To open the [Stamp Settings] dialog box
To change the position by dragging
Place your mouse pointer on the stamp displayed at the left of the [Placement] tab, then drag
the stamp to the desired position.
To change the position by specifying coordinates
In [Position], select the desired position of the stamp on the page. To define a custom position,
select [Custom], then select or enter the [X-Position] and [Y-Position] coordinates for the
position of the stamp.
To rotate a text stamp
You can rotate a stamp.
IMPORTANT IMPORTANT IMPORTANT
Windows 2000/XP: You can only rotate a stamp when [Text] is selected in [Stamp Type] on the
[Stamp] tab.
In [Orientation], select or enter the number of degrees to specify the angle of rotation of the
stamp.
The stamp will rotate only the number of degrees you specify. A positive number of degrees will rotate
the stamp counter clockwise and a negative number of degrees clockwise.
"Creating or changing a stamp"
42