Advanced Mode - [Color] Tab - Tone Curve - Canon MultiPASS MP360 Software Manual

Advanced Mode - [Color] tab - Tone curve

You can make subtle adjustments to the brightness of a specific area of an image by selecting the
type of the tone curve, a graph showing the balance of tone input and output.
The tone curve is active if [Color] or [Grayscale] is selected in [Color Mode] on the [Main] tab.
In ScanGear MP Advanced Mode, follow the steps below.
1
Click [Reset] in [Auto tone].
2
On the [Color] tab, click
3
For a color image, in [Channel], select a color to adjust either [Red], [Green], or [Blue],
or select [Master] to adjust the three colors together.
4
In [Select Special Curve], select the tone curve.
(Tone curve).
103