Table of Contents
Advertisement
The MultiPASS C5500 has four Receive Modes:
Fax Only Mode
Fax/Tel Mode
Manual Mode
Answer Machine Mode
You set the Receive Mode during the MultiPASS installation procedure.
(See your Quick Start Guide for details.)
You can change the Receive Mode and the Receive Fax options through
the MultiPASS Desktop Manager. See page 8-7 for details.
Receiving Documents
During reception of a fax:
If the unit runs out of paper or if the BJ cartridge runs out of ink,
the MultiPASS receives the remainder of the document in memory.
To stop receiving before the document is complete, press
Then press
If the
ALARM
then press
If an error occurs, the MultiPASS beeps intermittently for a few
seconds. If this happens, contact the other party and have them
resend the document.
Chapter 5
Receiving Faxes
to cancel reception.
*
light is flashing for any reason, correct the error and
. If necessary, see Chapter 10, Troubleshooting.
STOP
5
.
STOP
Receiving Faxes
5-1
Advertisement
Table of Contents
