Connect The Power Cord - Canon imageCLASS MF5770 Facsimile Manual

Connect the telephone cable and any necessary external device.
Connect the telephone cable
to the wall jack.
You can connect an external
device if necessary (optional).

Connect the power cord.

Plug the power cord into the rear socket ➊. Then connect the other end to the wall outlet ➋.
1
2
Once it is warmed up, the standby display
appears in the LCD.
IMPORTANT
For important safety instructions on installation and handling of the machine, see "Important Safety
●
Instructions" in the Basic Guide.
NOTE
Make sure the correct paper size is specified in the machine. For details, see Chapter 2,"Paper Handling," in the Basic
●
Guide.
Connect external devices as follows:
= Telephone line jack
= External device jack
Telephone or answering machine
Telephone
Machine
line
Telephone and answering machine
LINE
Telephone
Answering
Machine
line
Built-in computer modem and telephone
LINE
Telephone
Computer
Machine
line
Telephone or
answering machine
TEL
Telephone
machine
TEL Telephone