Set The Receive Mode - Canon imageCLASS MF5770 Facsimile Manual

Set the receive mode

1
Press [Menu]➊.
2
Press [ (–)] or [
<FAX SETTINGS> → press [Set]
3
Press [ (–)] or [
<RECEIVE MODE> → press [Set]
4
Press [ (–)] or [
receive mode → press [Set]
You can select from the following:
● <FaxOnly> to automatically receive faxes, all calls will be answered as fax transmission. Voice calls
will then be disconnected.
● <FaxTel> to automatically switch between fax and voice calls. Faxes will be received
automatically, and the machine will ring for voice calls.
● <AnsMode> to receive faxes automatically and route voice calls to an answering machine connect-
ed to the machine.
● <DRPD> to distinguish between fax and voice calls by using Distinctive Ring Pattern Detection.
● <Manual> for the connected telephone to ring for fax and voice calls. Fax calls must be answered
manually.
5
Press [Stop/Reset] to return to the standby display.
NOTE
For details on setting fax receive mode, see Chapter 5, "Receiving Faxes," in the Facsimile Guide.
●
Before using the machine, make sure you have set the correct telephone line type for your telephone line. For details on
●
setting fax receive mode, see Chapter 2, "Registering Information in Your Machine," in the Facsimile Guide.
(+)]➋ to select
.
(+)]➋ to select
.
(+)]➋ to select the
.
COPY FAX
Redial /
Pause
Alarm
Coded
Dial
In Use / Memory
Status
Directory
Monitor Clear
Start
Hook
SCAN
Menu
Stop/Reset
Set