Honeywell NOTIFIER LDM Series Instruction Manual page 61

Configuration for the LDM-32 and AFP-200
Alarm and Trouble Mode With 8-Point Shift
It is assumed that systems with 8-Point Shift selected will be 56 zones or less.
LDM Switch Position
Figure E.1 illustrates configuration of the LDM to annunciate the Active state of all 99 software zones (no zone troubles) with the first
eight points (P1 through P8) dedicated to the AFP-200 system function LEDs listed below.
* It is assumed this mod-
ule/expander annunciates zones
65-99 and is not functioning as a
'Receive Only' annunciator.
LDM Series Instruction Manual — P/N 15885:H3 8/12/2019
LDM-32
1 not used
2 not used
3 not used
4 not used
5 not used
6 not used
7 not used
8 not used
9 not used
10 not used
11 not used
12 not used
13 not used
14 not used
15 not used
16 not used
Table E.1 LDM Series Switch Control Functions
Address #1
LDM-32
LDM-E32
Address #2
LDM-32
LDM-E32
Figure E.1 Display Active Status of Software Zones Only
1st LDM-E32 2nd LDM-E32
not used not used
not used not used
not used not used
not used not used
not used not used
not used not used
not used not used
not used not used
not used not used
not used not used
not used not used
not used not used
not used not used
not used not used
not used not used
not used not used
1 - 8
System Functions *
33 - 40
25 - 32
65 - 72
57 - 64
97 - 99
89 - 96
J6
J5 OUTPUTS
View of LDM-32
* System Status Indicators
System Alarm
not used
J5
AFP-200 (UL 8th)
3rd LDM-E32
not used
not used
not used
not used
not used
not used
not used
not used
ACK
SIG.SIL.
RESET
DRILL
not used
not used
not used
not used
9 - 16 17 - 24
41 - 48 49 - 56
81 - 88
73 - 80
wire to
LEDs
J8
J7
61