Honeywell NOTIFIER LDM Series Instruction Manual page 27

Annunciator Operation
Figure A.3 illustrates the configuration of LDMs to annunciate alarms for up to 24 zones (no zone troubles) with the first eight points (P1
through P8) dedicated to the System 500 function annunciations listed below. No expander is needed in this mode.
Figure A.4 illustrates the configuration of LDMs to annunciate alarms for up to 24 zones (no zone troubles).
LDM Series Instruction Manual — P/N 15885:H3 8/12/2019
Address #1
System
LDM-32
Functions*
J5
* System Status Indicators
Notification Circuit #1 ON (Green LED)
System Alarm (Red LED)
Figure A.3 Alarm Points Only Operation
Address #1
LDM-32
1 - 8
J5
Figure A.4 Alarm Only Operation with CPU Shift
9 - 16 17 - 24
1 - 8
J6
OUTPUTS J7
view of LDM-32
Notification Circuit #2 ON (Green LED)
Municipal Tie ON (Red LED)
Alarm Relay ON (Red LED)
not used
J8
not
applicable
9 - 16 17 - 24
J6
OUTPUTS J7
view of LDM-32
System 500 (UL 8th)
wire to
LEDs
J8
wire to
LEDs
J8
27