Honeywell NOTIFIER LDM Series Instruction Manual page 53

Configuration for the LDM-32 and AFP-100
Figure D.1 illustrates configuration of the LDM to annunciate the Alarm state of all 56 software zones (no zone troubles) with the first
eight points (P1 through P8) dedicated to the AFP-100 system function LEDs listed below.
Figure D.2 illustrates configuration of the LDM to annunciate the Alarm state for up to 56 zones (no zone troubles) with the last eight
points (P57yea through P64) dedicated to the AFP-100 system function LEDs listed below.
It is assumed that the '8-Point Shift' will be selected only on systems containing less than 56 software zones or a total of 64 annunciator
points or less.
LDM Series Instruction Manual — P/N 15885:H3 8/12/2019
Address #1
LDM-32
System Functions *
LDM-E32
25 - 32
J5
System Alarm
Figure D.1 Display Alarm Status of 56 Software Zones Only Without 8-Point Shift
Address #1
1 - 8
LDM-32
33 - 40
LDM-E32
J5
System Alarm
Figure D.2 Alarm Status of 56 Software Zones with 8-Point Shift
1 - 8
9 - 16
33 - 40
41 - 48
J6
OUTPUTS J7
View of LDM-32
* System Status Indicators
not used
J5
9 - 16
17 - 24
System Functions *
41 - 48
49 - 56
J6
OUTPUTS J7
View of LDM-32
* System Status Indicators
not used
J8
AFP-100 (UL 8th)
17 - 24
49 - 56
wire to
LEDs
J8
25 - 32
wire to
LEDs
J8
53