Brother P-Touch 2450DX User Manual page 99

To use the Numbering function:
1 Rotate + until 16/21 NUMBER is displayed, and then press + (OR hold down
c and press O once). The message "START?" appears in the display.
To cancel the Numbering function at any time, hold down c and press O
(or press just * ).
2 Rotate + (OR press f, w, h or e) until the first character that you wish to
select for the number field is flashing.
3 Press + (OR press r). The message "END?" appears in the display.
If a bar code was selected, "NUMBER" appears in the display instead. Skip to step
6 to continue printing with the Numbering function.
4 Rotate + (OR press f, w, h or e) until all of the characters that you wish
to select for the number field are flashing.
A bar code cannot be selected in addition to other characters.
5 Press + (OR press r). The message "NUMBER" appears in the display.
6 Rotate + (OR press h or e) until the desired number of copies is displayed, or
use the number keys to type in the number.
7 Press + (OR press p or r) to begin printing the labels. The number of each
copy is displayed while it is being printed.
If the Auto cut function is set to ON, each label is automatically cut off after it is
printed.
EXAMPLE
To print three labels with numbers 1, 2 and 3:
+
1
Rotate
and then press
O
press
until 16/21 NUMBER is displayed,
+
(OR hold down
.)
c
and
Alt
Caps
95