Brother P-Touch 2450DX User Manual page 82

With the AUTO setting selected and 12-mm-, 18-mm- or 24-mm-wide tape installed,
text consisting of just one line of only uppercase letters (and no accented characters)
will be printed with a character size slightly larger than the maximum possible (29
points for 12-mm-wide tape, 48 points for 18-mm-wide tape, and 62 points for 24-mm-
wide tape).
EXAMPLE
To select the 24 point size setting:
1
While holding down
and keep
2
While still holding down
2
until 24 is displayed.
c
3
Release
To change the width setting:
1 Rotate + until 03/21 WIDTH (or 03/06 WIDTH for local formatting) is displayed, and
then press + to display the current width setting.
2 Rotate + until the desired width setting is displayed, and then press + to apply it to
the text.
OR
1 While holding down c, press 3 once, and keep c held down to display the
current width setting.
While still holding down c, continue pressing 3 until the desired width setting is dis-
2
played.
3 Release c to apply the selected width setting to the text.
The Width indicator comes on when a setting other than MEDIUM is selected.
78
c
, press
c
held down.
c
.
2
once,
, continue pressing
Alt
Caps
Alt
Caps