Brother P-Touch 2450DX User Manual page 27

With Mac OS X 10.1 to 10.2.4
1 With the P-touch and the Macintosh turned off, connect the P-touch to the computer
using the enclosed USB interface cable as described on page 6. Be sure to leave the
P-touch turned off.
2 Turn on the Macintosh.
3 Insert the enclosed CD-ROM into the computer's CD-ROM drive.
4 Double-click the Mac OS X folder to open it.
5 Double-click the P-touch Editor 3.2 folder to
open it.
6 Double-click the P-touch Editor 3.2 Installer
icon in the folder that appears.
7 The installer starts up, and then the Introduc-
tion dialog box appears. Click "Next".
When "Next" is pressed, a message
may appear, warning that an older ver-
sion of the software is installed. Be
sure to uninstall the older version of
the software before trying to install the
new software. For details on uninstall-
ing the software, refer to To uninstall
the P-touch Editor 3.2 software: on
page 42.
23