Brother P-Touch 2450DX User Manual page 71

To print a label using the selected layout:
9 Rotate + (OR press h or e) until PRINT appears below MENU.
0 Press + (OR press r) to print the label, then automatically cut it off. The message
"COPIES 1/ 1" appears in the display while the label is being printed.
To change the text entered in the layout:
A Rotate + (OR press h or e) until CONTINUE appears below MENU.
B Press + (OR press r). The first field for the selected layout appears in the display.
C Repeat step 4 until the text is edited as you wish. The MENU appears again when +
(OR r) is pressed after editing the last field in the layout.
To finish using the Auto format function:
D Rotate + (OR press h or e) until FINISH appears below MENU.
E Press + (OR press r).The message "EXIT AUTO FORMAT?" appears in the display.
F Press + (OR press r). Any text displayed before the Auto format function was
used reappears in the display.
The text entered in the selected layout is stored and is available if the same layout is
selected the next time that the Auto format function is used.
EXAMPLE
To create a short label for a file folder:
+
1
Rotate
and then press
Y
press
+
2
Rotate
out 35 (FILE SHORT) is displayed.
+
3
Press
until 13/21 A.FORMAT is displayed,
+
(OR hold down
).
h
(OR press or
r
(OR press ).
c
and
Alt
Caps
e
) until lay-
Alt
Caps
Alt
Caps
×
×
67