Table of Contents
Advertisement
Lighting The Grill Burners
(continued)
6. Repeat the procedure or try "Manual Lighting procedure"
below.
7. Upon successful lighting, repeat the process on the other
burners you wish to light.
8. To shut off burners push in knob and turn to OFF. It is
normal to hear a popping sound when the burners are
turned off.
Manually Lighting The Grill Burners
1. Open the hood.
2. Remove the grates over the burners you wish to light.
3. If you have just attempted to light the burner with the
rotary igniter knob, allow 5 minutes for any accumulated gas
to dissipate.
4. Keep your face as far away from the burners as possible.
5. Pass a lit, long stem match through one of the small bri-
quette tray holes and position it near the burner ports.
6. Push in and turn counter clockwise the grill's gas control
knob to the LITE position.
7. Listen for the "Whoosh" sound. If the burner does not
light after 5 seconds, turn the control knobs to the OFF posi-
tion. Wait 5 minutes until the gas clears before attempting
to light it again.
8. If the burner does not light after several attempts see
Troubleshooting Guide on pages 30-31.
9. Upon successful lighting, repeat the process on the other
burners you wish to light.
Advertisement
Table of Contents
