Table of Contents
Advertisement
Leak Testing Procedure
(continue)
7. If you are unable to stop a leak, shut off the gas
supply at the cylinder valve. Remove the cylinder
from the grill. Call an authorized gas appliance serv-
ice technician or LP gas dealer. Do not use the appli-
ance until the leak is corrected.
8. Push in and turn any control knob to release pres-
sure in the hose and manifold.
9. Turn off the control knob.
Installing the Heat Deflector
The Heat Deflector should be fully inserted in its
position, as shown, before using the grill.
"Insert Cad drawing showing
heat reflector"
Advertisement
Table of Contents
