Garmin G5 Maintenance Manual page 11

The G5 attitude functions are shown below:
•
Pitch
•
Roll
The G5 has a Turn Rate Indicator located at the bottom of the PFD Page. Tick marks to the left and right
of the displayed heading denote standard turn rates (3 deg/sec). A magenta Turn Rate Trend Vector
shows the current turn rate. A standard-rate turn is shown on the indicator by the trend vector stopping at
the standard turn rate tick mark.
The G5 displays slip/skid information as indicated by the location of the ball at the lower center portion
of the indicator.
The G5 receives a GPS input for attitude aiding via one of the following methods:
•
GPS antenna
•
GTN 6XX/7XX series navigator
•
GNS 4XXW/5XXW series navigator
•
GNS 480 series navigator
•
GTX 3x5 transponder
•
GPS 175/GNX 375 series navigators
The following functions are provided by the GPS input:
•
Ground Track
•
Ground Speed (GS)
When the G5 attitude is installed with a G5 HSI, the G5 attitude can also be interfaced to GPS NAV
and/or VHF NAV for display of lateral and vertical guidance.
The G5 installation is connected to the aircraft Pitot / Static system. The GTP 59 temperature probe is
optionally connected to the GAD 13 for Outside Air Temperature (OAT) information. The following
functions are provided:
•
Secondary Airspeed indicator
•
Secondary Barometric altimeter
•
Secondary Vertical speed
•
Secondary Altimeter Barometric Setting
•
Secondary Altimeter
•
Secondary Altitude Display
•
Selected altitude setting, bug and visual altitude alerting
•
Secondary Vertical Speed Indicator
•
Vspeed references
•
True Airspeed (TAS)
•
Crosswind speed and direction
•
OAT
The GMU 11 magnetometer can be installed as an optional interface for a standalone G5 attitude
display. This will allow the display of heading on the attitude display, but does not allow the removal of
the existing DG.
Garmin G5 Electronic Flight Instrument Part 23 AML STC Maintenance Manual
Page 3 of 54
190-01112-11
Rev. 7