Advertisement
STEP 1a: Attach Stringer (C) to one of the Legs (A) by lining up the Eclip with its corresponding holes, and sliding down
into place (see figure 1). Please Note: The interior of Legs(A) have two EClip attachment holes and the exterior has just one.
STEP 1b: Attach Stringer (C) to the other Leg (A) (see figure 2) by lining up
the Eclip with its corresponding holes, and sliding down into place (see figure
1.) Please Note: The interior of Legs (A) have two EClip attachment holes.
STEP 2: Attach Eclip Brackets (D) to outside of Legs (A) by lining up Eclip with it's corresponding hole, and sliding down
into place (see Figure 1 above).
D
A
Legacy Racetrack Conference Table • INSTRUCTIONS
(LCTRT7135, LCTRT9543, LCTRT12047)
Organize your parts. You may need a rubber mallet.
Any problems or questions call Regency Office Furniture at 1-866-816-9822
Figure 2
D
A
A
Figure 1
D
Advertisement
