Answers To Your Questions - Sagem MC 300 Series Manual

Answers to your questions

The phone does not turn on
- Remove the battery and then replace it.
or
- Connect the phone to the charger (check
that this is plugged in) for approximately 5
minutes.
No network recognised
- Remove the SIM card. Check that there
is no dust or grit in the SIM slot. Replace
the SIM card being sure to push it right up
to the stop point.
Calls to a messaging service or voice
server do not get through
- Check in the RINGING AND BEEPS /
SEND DTMF menu that ACTIVE is
selected.
MC300X_GB-QR.p65
55
55
Answers to your questions
27/04/2001, 10:36