Charging The Battery - Sagem MC 300 Series Manual

Hide thumbs Also See for MC 300 Series:
Table of Contents

Advertisement

2.3 Charging the battery

Your phone is powered by a rechargeable
battery. A new battery must be charged for at
least 4 hours before it is used for the first
time. It will reach its nominal capacity after
several usage cycles.
When your battery has run down, the phone
displays it and cuts out.
To recharge your battery:
Connect the charger to a mains socket.
Connect the end of the charging cable to
y
the bottom of your phone.
The phone will start charging, the battery
charging indicator indicates the level of
charge.
Charging stops by itself.
Unplug the cable.
It is possible that during charging, the battery
may heat up slightly; this is normal.
2. Getting started
MC300X_GB-02.p65
12
WARNING
There is a risk of explosion if the battery is
incorrectly replaced or disposed of in fire.
Do not short-circuit.
The battery does not contain any
components that can be changed by you.
Do not attempt to open the battery case.
Only use the correct chargers and
batteries as shown in the manufacturer’s
catalogue.
Spent batteries must be collected at the
appropriate sites.
You are advised to remove the battery if
you intend to leave your telephone unused
for a long period.
12
27/04/2001, 10:26

Advertisement

Table of Contents
loading

This manual is also suitable for:

Mc 3000

Table of Contents