Checking The Position Of A Number - Sagem MC 300 Series Manual

Enter the name to be stored (the number
of characters accepted depends on the
SIM card). Validate with OK.
Enter the phone number to be
stored, preceded by the area
code if required (up to 20
characters). Validate with OK.
You can introduce pauses into
the number (indicated by commas “,”) by
holding down * or # (including on the
standby screen). The numbers dialled
after a pause are used in DTMF
sequences (which can be used after a call
number).
Use the scrolling arrows to select where
you wish to store the number (SIM card or
phone) and validate with OK.
Second option: You select the number of
the position where the phone number will be
stored.
Display the DIRECTORY menu and press
OK.
- If the directory is empty, use the arrow
to select the POSITION menu, and
press OK.
5. Directory
MC300X_GB-05.p65
20
- If numbers are already stored in the
directory, select Menu and press OK or
the
the POSITION menu, and press OK.
It is advisable to
store numbers in
Use the arrow
their International
position, and press
format (+, country
position is proposed. Validate with OK.
code and number).
Enter the name to be stored (the number
of characters accepted depends on the
SIM card). Validate with OK.
Enter the phone number to be stored,
preceded by the area code if required (up
to 20 characters). Validate with OK.
5.3 Checking the position of a
number
Display the DIRECTORY menu, and press
OK. Using the scrolling arrows, select the
number to check, and press OK.
Press OK to access the SEE RECORD
menu. MEMxxx indicates the position of
the number in the directory.
20
key. Using the arrow , select
to select a free
* : the first free
27/04/2001, 10:29