Making A Call To A Stored Number - Sagem MC 300 Series Manual

5.8 Making a call to a stored number

From the standby screen, here are the
different ways to call a recipient the number
of which is stored in the directory:
1) Enter the first letter(s) of the recipient
name stored in the directory then press
The directory list is displayed, with the first
name stored which matches with the
recipient name ; if necessary, select the
recipient using the scrolling arrows.
Press to make the call.
2) Enter the number of the memory location
where you have stored the recipient
*
number then press (rapid dial).
3) Enter the number of the memory location
where you have stored the recipient
number then press #. The recipient
number is displayed, you can then modify
or add to the number.
Press to make the call.
5. Directory
MC300X_GB-05.p65
22
.
22 27/04/2001, 10:29