Auto Redial; Call Waiting; Call Hold - Sagem MC 300 Series Manual

7.5 Auto redial

CALL SERVICES/AUTO RDIAL
You can activate auto redial systematically or
on demand if your call did not complete.
Auto redial will be cancelled, during redial,
with any action on the phone (pressing a key,
incoming call, etc.).

7.6 Call waiting

(Service depending on the operator)
CALL SERVICES/CALL WAIT
To activate the function, display the
ACTIVATE menu and press OK.
During a conversation, you may be
warned that someone is trying to
reach you. You will hear a special
tone.
The message CALL WAIT followed
by the call sequence number (and
possibly the caller’s phone number
if stored) are displayed on screen.
MC300X_GB-07.p65
31
Depending on your network, you can then:
Cancel the waiting call by pressing C. The
caller then hears a busy tone.
Switch call by pressing OK. The current
call is put on hold and you can answer the
new call.
Terminate the current call by pressing
Your phone rings to indicate the waiting
call.

7.7 Call hold

(Service depending on the operator)
During a conversation, you can put the
current call ON HOLD by pressing OK or
then select «On hold».
You can activate,
deactivate, consult
The screen displays the message ON HOLD
the status of the
followed by the hold sequence number (and
call waiting
possibly the phone number if stored).
service and check
whether it is active
or not.
31
.
7. Call services
27/04/2001, 10:31