Selecting The Volume And The Type Of Ringing Tone; Settings The Beeps - Sagem MC 300 Series Manual

8.3 Selecting the volume and
the type of ringing tone
You can command your phone to
ring when receiving calls and/or
short messages.
RINGING AND BEEPS/HANDSET/CALLS
Select melody for calls to handset.
RINGING AND BEEPS/HANDSET/
MESSAGES
Select melody for messages to handset.
RINGING AND BEEPS/HANDS FREE/CALLS
Select melody for calls with a hands-free kit.
RINGING AND BEEPS/HANDS FREE/
MESSAGES
Select melody for messages with a hands-free
kit.
Select the desired tone by pressing the
scrolling arrows.
For each of the above selections, you can
listen to or bypass the tone test during the
setting phase pressing the
Select the desired volume by pressing the
and keys.
8. Ringing and beeps
MC300X_GB-08.p65
36
8.4 Setting the beeps
A wide variety of
melodies are
available (including
Setting the keypad tones
a “silent ring”) as
well as a number of RINGING AND BEEPS/BEEPS/
settings, including a
KEY. TONE
crescendo.
Setting the network tone
RINGING AND BEEPS/BEEPS/NETW.
BEEP
This menu allows your phone to emit a
warning beep when it finds a network on
which it may operate:
Setting the low battery tone
RINGING AND BEEPS/BEEPS/BATT.
BEEP
This menu allows your phone to emit a
key.
warning beep when the battery is low:
36
Choose the required tone by
pressing the scrolling arrows,
then validate.
Display ACTIVE with the scrolling
arrows, then validate.
Display ACTIVE with the scrolling
arrows, then validate.
27/04/2001, 10:33
You can select the
tones produced by
your keypad: Beep,
DTMF (musical
keys) or non active
tones (in this last
case, when you
press your
keyboard, it does not
make a noise).