Alcatel XL785 Voice Combo User Manual page 7

You can stop the paging by press , or any dialing keys on any cordless handset or
Note: If there is an incoming call during paging, the phone will ring with the incoming call instead of paging.
5. CALL BLOCK
This telephone is built-in with Smart Call Block feature*. This feature will help you avoid nuisance calls by only
allowing some numbers to make your phone ring.
*This feature is default turn OFF and requires a subscription of Caller Line Identification service from your tele-
phone service provider as well.
CALL BLOCK OVERVIEW
Setting Explanations
Off Call Block function is disabled. This is the default mode.
On Call Block function is set to Manual mode. Numbers stored in the block list will not go
through and the phone will ring silently.
Numbers can be added to the list while the phone is ringing and/or after a call (to enable,
see part 5.1).
Contacts In this mode, any number not stored to your phonebook will be automatically be blocked
and not cause your phone to ring. All calls match with contacts registered in your phone-
book will proceed normally.
When this mode is chosen, CONTACTS OK is displayed on LCD in idle mode unless you
have unread messages/missed calls (to enable, see part 5.2.1).
VIP In this VIP mode, only calls match with contacts registered as VIP in your phonebook will go
through and cause your phone to ring. Any other number will not ring. When this mode is
chosen, VIPS OK is displayed on the LCD in idle mode unless you have unread messages/
missed calls (to enable, see part 5.2.2)
ANONYMOUS This extra feature allows you to block call that do not have a number attached (ie private
calls, international calls, etc). This option can be enabled on top of any of the previous four
(to enable, see part 5.3)
5.1. Manual call block mode
Manual call block is the easiest option when starting out. When you chose ON in the call block settings, all calling
numbers stored in your block list will be blocked. You can add/remove numbers from that list at any time.
How to block an incoming call:
When Call Block function is set to ON, press
the option to store the number to the block list in one click.
Confirm? will appear on display, press on cordless handset , or OK on telephone base to confirm store this
number to the block list.
IMPORTANT: if you don't confirm, the number will not be added to the block list and the next call will go through
normally.
NOTE: All the procedures described below (from 5.1.1 to 6.1) can also be performed from the handset. From
there, the only difference is that the icon
5.1.1. Enable MANUAL mode
In idle mode,
Through Telephone base:
1. Press , press or to select Call Block
2. Press OK , press or to select Block Set. OR, press
3. Press OK , press or to select On (manual mode).
After you enable this option, the call block icon
5.2. Add numbers to Blocklist
5.2.1. In idle mode
Through Telephone base:
1. Press , Block Set is displayed, or Press
2. Press OK , press or to select Blocklist.
3. Press OK , press or to select Add New, enter number to be blocked, press OK to save.
5.2.2. From incoming call numbers
Depuis la base:
En mode veille, appuyez la touche
Through Telephone base:
1. In idle mode, press key, or press
2. Press or to browse the Call list.
on the base.
while the phone is ringing. It will terminate the call and offer you
described below corresponds to the handset
to access Block Set directly.
will be displayed on the LCD.
to press or to select Call Block.
, press or to access the Call list.
12
Press OK to select desired number.
3.
Press OK and
4.
Press OK to edit the number if necessary, press <OK> to save to Block List.
5.
5.2.3. From Redial numbers
Through Telephone base:
1. In idle mode, press
2. Press or
3. Press OK to select desired redial number.
4. Press OK and
5. Press OK to edit the number if necessary.
6. Press OK to confirm.
5.3. Edit numbers in Block List
Through Telephone base:
1. Repeat step 1 and 2 in Part 5.2.1.
2. Press OK , press
3. Press OK twice, press
4. Press OK , to edit, and then press OK to save.
5.4. Delete a numbers in Blocklist
Through Telephone base:
1. Repeat step 1 and 2 in Part 5.2.1.
Press OK , press
2.
Press OK , then press X Delete? will be show..
3.
Press OK to confirm delete, or press X confirm not to delete.
4.
5.5. Delete all numbers from Blocklist
Through Telephone base:
1. Repeat step 1 and 2 in Part 5.2.1.
2. Press OK , press
3. Press OK twice, press
4. Press OK , Confirm? will be show. Press OK to confirm delete, or press X confirm not to delete.
5.6. Automatic call block mode
5.6.1. VIPS only
In this restrictive automatic mode, only calls match with numbers stored as VIP in your phonebook will go
through and make your phone ring.
In idle mode,
Through Telephone base:
1. Repeat step 1 and 2 in Part 5.1.1., or press
key
2. Press OK , and
3. Press OK to confirm.
5.6.2. Contacts only
In this mode, only calls match with contacts stored in your phonebook (normal and VIP) will go through and
make your phone ring.
In idle mode,
Through Telephone base:
1. Repeat step 1 and 2 in Part 5.2, or press
2. Press OK , press
3. Press OK to confirm.
5.7. Anonymous call block mode
This feature allows you to block numbers that do not display a number on your phone. It can be enabled or
disabled independently from the other call block modes.
5.7.1. Block Private Calls
This mode will block incoming calls that have been purposely kept their numbers private from you.
In idle mode,
Through Telephone base:
1. Press , and
2. Press or
to select Add To Block.
or
key to access the redial list.
to browse the redial list.
or to select Add To Block.
or to select number to be edited.
or to select Edit.
or to select number to be deleted.
or to select any Block number.
or to select Delete All.
to access BLOCK SET directly.
/ to select VIP OK.
to access BLOCK SET directly.
or to select Contacts OK.
to select Call Block, then press OK , or press
or
to select Block Anonym.
13
instead.