Changing Lcd Language; Improving The Lcd Viewing - Brother DCP-135C User Manual

Error Message Cause
A USB device or USB Flash
Unusable Device
memory drive that is not supported
Please Disconnect
has been connected to the USB
USB Device.
direct interface.
For more information, visit us at
http://solutions.brother.com.

Changing LCD language

You can change the LCD language.
a
Press Menu.
b
Press a or b to choose
0.Initial Setup.
Press OK.
c
Press a or b to choose
0.Local Language.
Press OK.
d
Press a or b to choose your language.
Press OK.
e
Press Stop/Exit.
Troubleshooting and Routine Maintenance
Action
Unplug the device from the USB direct interface.

Improving the LCD viewing

B
You can adjust the LCD contrast for a sharper
and more vivid display. If you are having
difficulty reading the LCD, try changing the
contrast setting.
a
Press Menu.
b
Press a or b to choose
0.Initial Setup.
Press OK.
c
Press a or b to choose
2.LCD Contrast.
Press OK.
d
Press a or b to choose Light or Dark.
Press OK.
e
Press Stop/Exit.
B
B
59