Thread Breakage Sensor - Brother BE-0901E-AC-PC Instruction Manual

Thread Breakage Sensor

The sensor for thread breakage can be turned ON/OFF or the sensor sensitivity for each needle
bar can be set.
! The sensitivity can be set within the range of 1 - 100.
sensitivity is.
1. Select [Thread Breakage Sensor] from Setting menu.
2. Click the head you want to disable the sensor and remove the check mark ( ).
3. Adjust the sensor sensitivity.
4. Click [OK].
W1642
The sensor sensitivity for each
needle bar is adjusted individually.
All sensor sensitivities for all needle
bars are adjusted simultaneously.
W1643
BE-0901E-AC-PC• BE-1201B-AC-PC
The smaller the value is, the higher the
Chapter 6 Embroidering
6-33