Displaying The Status Bar; Upgrading The Version Of Interface Board; Reset Interface Board; Communication Port - Brother BE-0901E-AC-PC Instruction Manual

Displaying the Status Bar

Shows/hides the status bar. The status bar provides information on the current status and
advice for operation.
1. Select [Status Bar] from View menu and put the check mark.
Click here again to remove the check mark. Then the status bar disappears.

Upgrading the Version of Interface Board

Upgrades the version of interface board program connected to PC. This function is protected by a
password. A dealer engineer will use this function if required.

Reset Interface Board

Resets the CPU on the interface board connected to PC to give the same effect as restart.
This function is protected by a password. A dealer engineer will use this function if required.

Communication Port

Sets communication port between PC and machine.
1. Select [Communication Port] from Configuration menu.
2. Select communication port for use.
3. Click [OK].
W1062Q
If the required port
name does not appear,
key-in the name.
W1063Q
BE-0901E-AC-PC• BE-1201B-AC-PC
Chapter 6 Embroidering
6-7