Thread Breakage Sensor; Setting Of Sensor Validity/Invalidity; Thread Breakage Sensitivity - Brother BES-1241BC Instruction Manual

Chapter 5 Setting

Thread Breakage Sensor

Validity or invalidity and sensitivity of the thread breakage sensor can be set.
1.
2.
3.
Sensitivity of the thread breakage sensor can be set.
1.
2.
3.
94

Setting of sensor validity/invalidity

This function is previously set to valid for all heads upon shipment.
Press .
Specify the number of a machine head by pressing ten keys and validate
or invalidate the thread breakage sensor.
Pressing the same ten key once again changes between validity and invalidity.
Press to switch over the thread breakage sensor for each head between ON and OFF.
Press .
END
Modified setting is saved and the initial screen or halt screen is displayed again.

Thread Breakage Sensitivity

The sensitivity can be set within the range of 1 ~ 100. Sensitivity increases as
the figure decreases.
This function is previously set to 10 upon shipments.
Press twice.
Select the needle bar for which the sensitivity is modified by pressing
.
The number of needle bars changes in the sequence of :
ALL (all needle bars)
Select by pressing
BES-941BC • BES-1241BC
1 2 ... 9 or 12 (max.)
.
Heads with which the sensor is valid
ALL ...