Insert Lock Stitch - Brother BE-0901E-AC-PC Instruction Manual

Chapter 5 Editing Embroidery Data

Insert Lock Stitch

Find the pattern of [Stitch] - [Trim] for [Before Trimming] and find the pattern of [Trim] - [Feed] -
[Stitch] - [Stitch] for [After Trimming], then insert a lock stitch.
! Insertion method of lock stitch depends on the length of the second stitch as follows:
Stitch length
1.2 mm or more
From 0.9 mm to less than 1.2 mm
From 0.6 mm to less than 0.9 mm
Less than 0.6 mm
! The inserted lock stitch cannot be deleted. However, use [Undo] in the Edit menu to return to the
status before inserting the lock stitch just after the lock stitch is inserted.
1. Select [Insert lock stitch] from the Edit menu.
2. Designate the position to insert the lock stitch and click [OK].
3. If the lock stitch can be inserted, click [Yes].
5-22
Method of lock stitch
Insert 3 stitches of 0.3 mm stitch.
Insert 2 stitches of 0.3 mm stitch.
Insert 1 stitch of 0.3 mm stitch.
Do not insert the lock stitch.
W1040Q
W1041Q
BE-0901E-AC-PC• BE-1201B-AC-PC