Network Scanning; Before Using Network Scanning; Network License - Brother MFC-9420CN Software User's Manual

4

Network Scanning

To use the machine as a Network Scanner, the machine must be configured with a TCP/IP address that
matches your network. You can set or change the settings from the control panel. (Please see the Network
User's Guide on the CD-ROM.) If you installed the machine following the instructions for a network user in
the Quick Setup Guide then the machine should already be configured for your network.

Before using Network Scanning

Network License

MFC-9420CN includes a PC license for up to 5 Users.
This license supports the installation of the MFL-Pro Software Suite including ScanSoft
on up to 5 PC's for use on a network.
If you want to use more than 5 PCs with ScanSoft
agreement pack for up to 5 additional Users. To purchase a NL-5 license agreement pack, please contact
your Brother Sales Office.
Note
■
A maximum of 25 clients can be connected to one machine on a Network. For example, if 30 clients try
to connect, 5 clients will not be shown on the LCD.
■
To use Network Scanning with Windows
program must be excluded from the firewall setting. Visit the Solutions Center
(http://solutions.brother.com) for more information.
■
Network Scanning is not supported in Windows NT
® ®
PaperPort 9.0SE, please purchase the NL-5 PC license
®
XP that is protected by the firewall, the Network Scanning
®
.
® ®
PaperPort 9.0SE
4 - 1
4