Accessing The Scanner - Brother MFC-9420CN Software User's Manual

Scanning

Accessing the Scanner

1
Open the software application (ScanSoft
Note
The instructions for scanning in this guide are relevant for ScanSoft
into another software application, the steps may vary.
2
Click File, then Scan. Or select the Scan button.The Scan panel appears in the left side of the screen.
3
Choose the scanner you are using from the Scanner drop-down list box.
Note
If the machine is connected via:
■
Parallel cable use Brother MFC-9420CN
■
USB cable use Brother MFC-9420CN USB
■
LAN cable use Brother MFC-9420CN LAN
If you are using Windows
4
Click Scan.
The Scanner Setup dialog box will appear:
®
PaperPort
®
XP, select TW-Brother MFC-9420CN, not WIA-Brother MFC-9420CN.
®
9.0SE) to scan a document.
® ®
PaperPort 9.0SE. If you are scanning
2
2 - 2