OPC belt cartridge
Replace OPC belt cartridge message
When the OPC belt cartridge runs out, the
following message appears on the LCD.
When you see this message, you must
replace the OPC belt cartridge:
Replace OPC Belt
WARNING
■
Do not touch the green film of the OPC
belt cartridge. If you touch it, it could
degrade print quality.
■
Do not expose the OPC belt cartridge
to bright room light or sunlight for more
than two minutes to avoid damaging
the belt.
■
Damage caused by improper handling
of the OPC belt cartridge may void your
warranty.
Troubleshooting and routine maintenance
Replacing the OPC belt cartridge
(OP-4CL)
1
Turn off the machine's power switch.
2
Open the scanner unit.
3
Open the inside cover so that it latches
under the scanner unit.
4
To release the lock, push the green belt
cartridge lock levers on both sides
inwards.
C
C - 33