Mode Timer; Paper Settings; Paper Type - Brother MFC-9420CN User Manual

Mode Timer

The machine has three temporary mode keys
on the control panel: Fax, Scan and Copy.
You can change the number of seconds or
minutes the machine takes after the last Scan
or Copy operation before it returns to Fax
mode. If you select Off , the machine stays in
the mode you used last.
1
Press Menu/Set, 1, 1.
General Setup
1.Mode Timer
2
Press ▲ or ▼ to select 0 Sec ,
30 Secs , 1 Min , 2 Mins , 5 Mins or
Off .
Press Menu/Set.
3
Press Stop/Exit.

Paper settings

Paper Type

To get the best print quality, set the machine
for the type of paper you are using.
1
Press Menu/Set, 1, 2.
General Setup
2.Paper Type
—OR—
If you have the optional paper tray,
Press Menu/Set, 1, 2, 1 to set the paper
type for Tray#1 or Menu/Set, 1, 2, 2 to
set the paper type for Tray#2 .
2
Press ▲ or ▼ to select Thin , Plain ,
Thick , Thicker or Recycled Paper .
Press Menu/Set.
3
Press Stop/Exit.
Note
The machine ejects paper with printed
surfaces face down onto the output paper
tray in the front of the machine. When you use
transparencies or labels, remove each sheet
immediately to prevent smudging or paper
jams.
Setup
3
3 - 6