Important Information; For Your Safety; Iec 60825-1 Specification; Disconnect Device - Brother MFC-9420CN User Manual

A

Important information

For your safety

To ensure safe operation the supplied three-pin
plug must be inserted only into a standard
three-pin electrical socket that is effectively
grounded through the normal household wiring.
The fact that the equipment operates satisfactorily
does not imply that the power is grounded and that
the installation is completely safe. For your safety,
if in any doubt about the effective grounding of the
power, call a qualified electrician.

IEC 60825-1 Specification

This machine is a Class 1 laser product as defined
in IEC 60825-1 specifications. The label shown
below is attached in countries where required.
CLASS 1 LASER PRODUCT
APPAREIL À LASER DE CLASSE 1
LASER KLASSE 1 PRODUKT
This machine has a Class 3B Laser Diode which
emits invisible laser radiation in the Scanner Unit.
The Scanner Unit should not be opened under any
circumstances.
A - 1
The following caution label is attached on the
cover of the scanner unit.
CAUTION -
CLASS 3B INVISIBLE LASER RADIATION WHEN OPEN,
AVOID DIRECT EXPOSURE TO BEAM.
VORSICHT -
UNSICHTBARE LASERSTRAHLUNG DER KLASSE 3B,
WENN GEÖFFNET. NICHT DEM STRAHL AUSSETZEN.
PRÉCAUTION - RAYONLASER INVISIBLE DE CLASSE 3B LORS DE
L'OUVERTURE. EVITER TOUTE EXPOSITION DIRECTE.
ATENÇÃO -
RADIAÇÃOLASER INVISÍVEL AO ABRIR EVITE A
EXPOSIÇÃO AO DIRETA AO FEIXE.
Laser Diode
Wave length: 780 - 800 nm
Output: 5 mW max.
Laser Class: Class 3B
WARNING
Use of controls, adjustments or performance of
procedures other than those specified in this
manual may result in hazardous radiation
exposure.

Disconnect device

This product must be installed near an electrical
socket that is easily accessible. In case of
emergencies, you must disconnect the power cord
from the electrical socket to shut off power
completely.
5mW
7 8 0 n m - 8 0 0 n m
MAS