Setup Send; Before You Begin; Sending Faxes Using Multiple Settings; Faxing From The Adf (Automatic Document Feeder) - Brother MFC-9800 Owner's Manual

6

Setup Send

6

Before You Begin

You can send a fax from the ADF (Automatic Document Feeder) or from the
scanner glass.

Sending Faxes Using Multiple Settings

When you send a fax you can choose any combination of the available settings:
add a cover page and select a comment; set the contrast or resolution; send using
overseas mode, or delayed fax timer, polling transmission or real time
transmission. After each menu selection is accepted, the LCD will ask if you
want to enter other settings:
Press 1 if you want to select additional settings. The LCD returns to the SETUP
SEND menu—OR—Press 2 if you are finished choosing settings, and go to the
next step.

Faxing from the ADF (Automatic Document Feeder)

The ADF can hold up to 50 pages, feeding each one individually through the
MFC. Use standard (20 lb/75g/m
pages well before placing them in the ADF.
DO NOT use curled, wrinkled, folded, ripped paper, or paper with staples,
paper clips, paste or tape attached. DO NOT use cardboard, newspaper, or
fabric. (To fax this kind of original, see
I
Make sure originals written with ink are completely dry.
I
Before you send a fax, press Resolution to select the resolution for the type of
original you are sending. (See
2
) paper when using the ADF. Always fan the
Faxing from the Scanner Glass
, page 6-7.)
Fax Resolution
, page 6-3.)
S E T U P S E N D
6 - 1