Restoring All Settings To The Factory Settings; Out Of Memory' Message - Brother MFC-490CW User Manual

Chapter 11
Restoring all settings to the
factory settings
You can restore all the settings you have
changed to the factory settings. These
settings will stay until you change them again.
a
Press (Copy).
b
Press a or b to choose
Factory Reset.
Press OK.
c
Press 1 to choose Yes.
d
Press Stop/Exit.
86
'Out of Memory'
message
11
If the Out of Memory message appears
while scanning document, press Stop/Exit to
cancel or Black Start or Color Start to copy
the scanned pages.
You will need to clear some jobs from the
memory before you can continue.
To free up extra memory, do the following:
Turn off Memory Receive. (See Turning
off Memory Receive Operations
on page 48.)
Print the faxes that are in the memory.
(See Printing a fax from the memory
on page 49.)
When you get an Out of Memory
message, you may be able to make copies if
you first print incoming faxes in the memory to
restore the memory to 100%.
11