Fax Redial; Outgoing Call - Brother MFC-490CW User Manual

Fax Redial

If you are sending a fax manually and the line
is busy, press Redial/Pause, and then press
Black Start or Color Start to try again. If you
want to make a second call to a number you
recently dialed, you can press Redial/Pause
and choose one of the last 30 numbers from
the Outgoing Call List.
Redial/Pause only works if you dialed from
the control panel. If you are sending a fax
automatically and the line is busy, the
machine will automatically redial once after
five minutes.
a
Press Redial/Pause.
b
Press a or b to choose the number you
want to redial.
Press OK.
c
Press a or b to choose Send a fax.
Press OK.
d
Press Black Start or Color Start.
Note
In Real Time Transmission the automatic
redial feature does not work when using
the scanner glass.

Outgoing Call

8
The last 30 numbers you sent a fax to will be
stored in the outgoing call history. You can
choose one of these numbers to fax to, add to
Speed Dial or delete from the history.
a
Press Redial/Pause.
You can also choose Outgoing Call
by pressing
b
Press a or b to choose the number you
want.
Press OK.
c
Do one of the following:
To send a fax, press a or b to choose
Send a fax.
Press OK.
Press Black Start or Color Start.
If you want to store the number,
press a or b to choose
Add to Speed Dial.
Press OK.
(See Storing Speed Dial numbers
from Outgoing Calls on page 67.)
Press a or b to choose Delete.
Press OK.
Press 1 to confirm.
d
Press Stop/Exit.
Dialing and storing numbers
(Fax).
8
8
65