Photocapture Center ® Print Settings - Brother MFC-490CW User Manual

PhotoCapture Center
PhotoCapture Center
You can change the print settings temporarily for the next printing.
These settings are temporary, and the machine returns to its default settings 3 minutes after
printing, unless you have set the Mode Timer to 2 minutes or less. (See Mode Timer on page 24.)
Note
You can save the print settings you use most often by setting them as default. (See Setting
your changes as the new default on page 103.)
1 No. of prints
(For View Photo(s), Search by Date, Slide Show)
You can see the total number of photos that will be printed.
(For Print All Photos, Print Photos, Enhance Photos, Trimming)
You can see the number of copies of each photo that will be printed.
(For DPOF printing) This does not appear.
Menu Selections
Print Quality
(Does not appear for
DPOF printing)
Paper Type
Paper Size
Brightness
(Does not appear
when
Enhance Photos is
chosen.)
Contrast
(Does not appear
when
Enhance Photos is
chosen.)
®
: Printing photos from a memory card or USB Flash memory drive
®
Print Setting Print Setting
Print Quality
Paper Type Paper ype
Paper Size Paper Size
Print Size Print Size
Brightness Brightness
PHOTO
Options 1
Normal/Photo
Plain Paper/Inkjet Paper/
Brother BP71/Other Glossy
4"x 6"/5"x 7"/Letter/ A4
Dark Light
print settings
0001 0001
Photo
Other Glossy Other Glossy
4"x6" 4"x6"
Max. Size Max. Size
0
Print Press Start
Options 2
—
—
(When A4 or Letter is chosen)
3"x 4"/3.5"x 5"/
4"x 6"/
6"x 8"/Max. Size
—
—
1
Page
100
100
100
5"x 7"/
101
101
12
12
99