Automatic Daylight Savings Time; Sleep Mode - Brother MFC-490CW User Manual

Automatic Daylight
Savings Time
You can set the machine to change
automatically for daylight savings time. It will
reset itself forward one hour in the Spring and
backward one hour in the Fall. Make sure you
have set the correct date and time in the
Date&Time setting.
The factory setting is Off, so you will have to
turn on Automatic Daylight Saving Time as
follows.
a
Press Menu.
b
Press a or b to choose
General Setup.
Press OK.
c
Press a or b to choose
Auto Daylight.
d
Press d or c to choose On (or Off).
Press OK.
e
Press Stop/Exit.

Sleep Mode

You can choose how long the machine must
3
be idle (from 1 to 60 minutes) before it goes
into sleep mode. The timer will restart if any
operation is carried out on the machine.
a
Press Menu.
b
Press a or b to choose
General Setup.
Press OK.
c
Press a or b to choose Sleep Mode.
d
Press d or c to choose 1Min, 2Mins,
3Mins, 5Mins, 10Mins, 30Mins or
60Mins, which is the length of time the
machine is idle before entering sleep
mode.
Press OK.
e
Press Stop/Exit.
General setup
3
3
27