Brother MFC-490CW User Manual page 155

Error Message
Unable to Clean XX
Unable to Init. XX
Unable to Print XX
Unable to Scan XX
Unusable Device
Disconnect device from
front connector & turn
machine off & then on
Cause
The machine has a mechanical
problem.
— —
OR
A foreign object such as a clip or
ripped paper is in the machine.
The machine has a mechanical
problem.
— —
OR
A foreign object such as a clip or
ripped paper is in the machine.
The machine has a mechanical
problem.
— —
OR
A foreign object such as a clip or
ripped paper is in the machine.
The machine has a mechanical
problem.
— —
OR
A foreign object such as a clip or
ripped paper is in the machine.
A broken device has been
connected to the USB direct
interface.
Troubleshooting and Routine Maintenance
Action
Open the scanner cover and look inside
the machine for foreign objects and paper
scraps. If the error message continues,
see Transferring your faxes or Fax Journal
report on page 140 before disconnecting
the machine so you will not lose any
important messages.
Then, disconnect the machine from the
power source for several minutes and then
reconnect it.
Open the scanner cover and look inside
the machine for foreign objects and paper
scraps. If the error message continues,
see Transferring your faxes or Fax Journal
report on page 140 before disconnecting
the machine so you will not lose any
important messages.
Then, disconnect the machine from the
power source for several minutes and then
reconnect it.
Open the scanner cover and look inside
the machine for foreign objects and paper
scraps. If the error message continues,
see Transferring your faxes or Fax Journal
report on page 140 before disconnecting
the machine so you will not lose any
important messages.
Then, disconnect the machine from the
power source for several minutes and then
reconnect it.
Open the scanner cover and look inside
the machine for foreign objects and paper
scraps. If the error message continues,
see Transferring your faxes or Fax Journal
report on page 140 before disconnecting
the machine so you will not lose any
important messages.
Then, disconnect the machine from the
power source for several minutes and then
reconnect it.
Unplug the device from the USB direct
interface, then press On/Off to turn the
machine off and then on again.
B
139